Valve Skids
A valve skid groups control, isolation and safety valves with their piping and instruments on one steel frame. It replaces loose site work with one unit that is connected at its inlet and outlet flanges.
We fabricate the frame and the manifold piping, and fit valves and instruments to your specification or vendor list. We hold a GC2 industrial piping installation licence (TS3836019-2027).
Frames are blasted to Sa 2.5 and coated with epoxy zinc-rich primer and polyurethane topcoat.
| Scope | Frame, manifold piping, valves, instruments, cable trays |
|---|---|
| Frame steel | Q235B, Q355B |
| Piping | Carbon or stainless steel to your piping class |
| Welding | GTAW (argon arc), GMAW and SAW to qualified WPS/PQR |
| NDT | RT, UT, MT, PT as specified |
| Coating | Sa 2.5 blasting, epoxy zinc-rich primer + polyurethane topcoat |
| Piping licence | GC2 industrial piping installation, TS3836019-2027, valid to 2027-04-14 |
Sizes and ratings are confirmed against your data sheet.
- Distribution and isolation manifolds in oil and petrochemical plants
- Tank farm inlet and outlet manifolds
- Water and wastewater treatment
- Fuel and gas distribution
- Base frame cut, welded to qualified WPS/PQR, blasted to Sa 2.5 and coated with epoxy zinc-rich primer and polyurethane topcoat.
- Piping spools cut and welded by GTAW (argon arc) and GMAW; weld NDT by RT, UT, MT or PT as specified.
- Equipment, valves, instruments and cabinet mounted and piped up on the frame.
- Piping pressure test as specified, then dimensional check against the layout drawing.
- Packing and loading with overhead cranes up to 50 t.
- Documents supplied: certificate of conformity, quality certificate, as-built drawings, MTRs, WPS/PQR welding records, NDT reports and packing list.
Can you build a valve skid to our P&ID?
Yes. Send the P&ID, valve list, piping class and layout, and we fabricate the frame and manifold and fit the valves and instruments to them.
Who supplies the valves and instruments?
We fit valves and instruments from the vendors you specify, or source them to your data sheet.
What tests are done before delivery?
Weld NDT as specified, a piping pressure test, and a dimensional check of flange positions against the layout drawing.
What should be included in the purchase order?
P&ID and layout, valve and instrument list with vendors, piping class, NDT extent, test requirements, coating specification, documents required, destination port and delivery date.
Related products.
Quote this product.
Send the medium, design pressure, temperature and quantity. An engineer replies with questions or a quotation.
- Sales contact
- Mr. Yu Jiakang
- WhatsApp / WeChat
- +86 183 1791 9067
- Factory
- No. 2666 Jinxian Avenue, High-tech Industrial Park, Jinxian Economic Development Zone, Nanchang, Jiangxi, China 331700
Pressure vessels, storage tanks, SF double-wall tanks, steel structures and skid-mounted units, fabricated in Jinxian, Jiangxi since 2003.
Jiangxi Wanlong Industrial Co., Ltd.
No. 2666 Jinxian Avenue, High-tech Industrial Park, Jinxian Economic Development Zone, Nanchang, Jiangxi, China 331700
Contact
- Mr. Yu Jiakang
- WhatsApp +86 183 1791 9067
- jiakang@wanlongindustrial.com
