Pump Skids
A pump skid groups pumps, motors, piping, valves and instruments on one steel base frame. It arrives on site as one unit, ready to connect to the plant piping and power.
We fabricate the base frame and the interconnecting piping, and assemble pumps, motors and instruments to your specification or vendor list. We hold a GC2 industrial piping installation licence (TS3836019-2027).
A control cabinet can be mounted on the skid where the design calls for it.
| Scope | Base frame, pumps and motors, interconnecting piping, valves, instruments, control cabinet |
|---|---|
| Frame steel | Q235B, Q355B |
| Piping | Carbon or stainless steel to your piping class |
| Welding | GTAW (argon arc), GMAW and SAW to qualified WPS/PQR |
| NDT | RT, UT, MT, PT as specified |
| Coating | Sa 2.5 blasting, epoxy zinc-rich primer + polyurethane topcoat |
| Piping licence | GC2 industrial piping installation, TS3836019-2027, valid to 2027-04-14 |
Sizes and ratings are confirmed against your data sheet.
- Transfer and loading pumps in oil and petrochemical plants
- Chemical dosing and circulation
- Water and wastewater treatment
- Fuel transfer at depots
- Base frame cut, welded to qualified WPS/PQR, blasted to Sa 2.5 and coated with epoxy zinc-rich primer and polyurethane topcoat.
- Piping spools cut and welded by GTAW (argon arc) and GMAW; weld NDT by RT, UT, MT or PT as specified.
- Vessels on the skid built and hydrostatically tested at 1.25 × design pressure with a 30-minute hold.
- Equipment, valves, instruments and cabinet mounted and piped up on the frame.
- Piping pressure test as specified, then dimensional check against the layout drawing.
- Packing and loading with overhead cranes up to 50 t.
- Documents supplied: certificate of conformity, quality certificate, as-built drawings, MTRs, WPS/PQR welding records, NDT reports and packing list.
Can you build pump skids to our P&ID and vendor list?
Yes. Send the P&ID, equipment list, vendor list and layout. We fabricate the frame and piping and assemble the equipment to them.
Who supplies the pumps and motors?
We assemble pumps and motors from the vendors you specify, or source them to your data sheet.
How is the skid inspected before shipment?
Weld NDT as specified, piping pressure test, dimensional check against the layout drawing and coating check, with the records in the documents supplied.
Can one supplier provide skids, vessels and steel structures for the same project?
Yes. Skids, pressure vessels, storage tanks and steel structures are all fabricated on our site in Jinxian.
Related products.
Quote this product.
Send the medium, design pressure, temperature and quantity. An engineer replies with questions or a quotation.
- Sales contact
- Mr. Yu Jiakang
- WhatsApp / WeChat
- +86 183 1791 9067
- Factory
- No. 2666 Jinxian Avenue, High-tech Industrial Park, Jinxian Economic Development Zone, Nanchang, Jiangxi, China 331700
Pressure vessels, storage tanks, SF double-wall tanks, steel structures and skid-mounted units, fabricated in Jinxian, Jiangxi since 2003.
Jiangxi Wanlong Industrial Co., Ltd.
No. 2666 Jinxian Avenue, High-tech Industrial Park, Jinxian Economic Development Zone, Nanchang, Jiangxi, China 331700
Contact
- Mr. Yu Jiakang
- WhatsApp +86 183 1791 9067
- jiakang@wanlongindustrial.com
