Pressure vessel, storage tank & steel structure manufacturer in China
Service Creates Value,
Quality Comes
from Details.
Pressure vessels, storage tanks, SF double-wall tanks, steel structures and skid-mounted units, cut, rolled, welded and tested on one 133,000 m² site in Jiangxi.
SF double-wall tanks
Set in the ground
by our own crews.
Steel inner tank, FRP outer jacket and a monitored interstitial space, supplied under framework agreements with a national fuel retailer.
Steel structures
And the steel that
stands above them.
Station canopies, pipe racks, platforms and space frames, fabricated in the bay next to the tank line.
The plant · Jinxian, Jiangxi
One fence line
since 2003.
A 133,000 m² site, 50,000 t of annual capacity and 180 people, 45 of them engineers and technicians.
Five product lines.One shop floor.
Every line is cut, rolled, welded, inspected and coated in our own workshops, so one supplier can quote the vessels, the tanks and the steel on your project.
All products
Pressure Vessels
Reaction · Heat exchange · Separation · StorageBuilt to your data sheet, then rolled, welded and hydro-tested in our vessel workshop.
−0.1 to <10 MPa · GB/T 150View range
Storage Tanks
Vertical · Horizontal · Fuel · AnaerobicCarbon and stainless steel tanks, shop-built or erected on site.
Shop-built to 5,000+ m³ · field-erectedView range
SF Double-Wall Tanks
Underground fuel storageSteel inner tank, FRP outer jacket and a monitored interstitial space.
10–50 m³ · SH/T 3178 · UL 1746View range
Steel Structures
Canopies · Pipe racks · PlatformsStation canopies, pipe racks, platforms and space frames, fabricated and erected.
Q235B / Q355B · GB 50205View range
Skid-mounted Units
Refuelling · Pump & valve skidsTank, pumps and dispensers delivered on one skid, ready to connect.
10–30 m³ fuel skids · Ex dView rangePart by part,seam by seam.
Each product line drawn the way we build it: shells, heads, jackets and frames first, the welds that hold them last.
Pressure Vessels
Reaction, heat-exchange, separation and storage vessels, built under our Class D licence to GB/T 150 and TSG 21.
- Design pressure
- −0.1 to <10 MPa
- Design temperature
- −196 °C to 350 °C
- Shell plate
- Up to 70 mm
- Materials
- Q245R, Q345R, 15CrMo, 304, 316L
Storage Tanks
Vertical and horizontal tanks in carbon and stainless steel, shop-built in Jinxian or erected on site.
- Volume
- 5 to 5,000+ m³
- Wall thickness
- 6 to 70 mm
- Materials
- Q235B, Q345R, 304, 316L
- Protection
- Sa 2.5, epoxy zinc-rich + PU
SF Double-Wall Tanks
A steel inner tank, an FRP outer tank and a monitored interstitial space, for underground fuel storage.
- Volume
- 10 to 50 m³
- Inner tank
- Q235B steel
- Outer tank
- FRP
- Standards
- SH/T 3178 · UL 1746
Steel Structures
Station canopies, pipe racks, platforms and built-up members, welded, blasted and coated before they leave the bay.
- Steel grades
- Q235B, Q355B
- Welding
- SAW and GMAW to WPS / PQR
- Surface
- Sa 2.5 blasting
- Codes
- GB 50017 · GB 50205
Skid-mounted Units
Tank, dispenser and safety equipment on one skid, assembled and tested in our workshop before delivery.
- Models
- JY-10, JY-20, JY-30, JYQ-20
- Tank
- 10 to 30 m³ SF double-wall
- Explosion protection
- Ex d IIA T4 (JY series)
- Media
- Petrol, diesel; CNG / LNG
Plate to pressure test,under one roof.
- Site
- 133,000m²
- Vessel workshop
- 30,000m²
- Annual capacity
- 50,000t
- Overhead cranes
- to 50t
Jinxian, Jiangxi
Headquarters, vessel workshop and steel-structure bays on one site, 180 people, 45 of them engineers and technicians.
CNC laser, flame and plasma
Shell plates, head blanks and structural members are cut and bevelled from verified plate.
Shells from plate up to 70 mm
Three- and four-roll benders form the cylindrical courses.
Submerged-arc seams
Longitudinal and circumferential welds to qualified WPS / PQR.
RT and UT in our own room
Then hydrostatic testing at 1.25 × design pressure with a 30-minute hold.
Sa 2.5 before coating
CNC shot blasting removes mill scale and rust.
Epoxy, PU and FRP lines
Paint systems for steel; spray lines build the FRP jacket of double-wall tanks.
Loaded with its data book
Overhead cranes up to 50 t load finished equipment for the road.
Built for what goes inside.
- Product & crude storage tanks
- SF double-wall fuel tanks, refuelling skids
- Pipe racks and station canopies
- Ethylene tank farm, Yantai
- Refinery tank package, Huizhou
- Anaerobic digesters
- Leachate and wastewater tanks
- Cold-storage tanks
- Leachate tanks for eight waste-to-energy plants
- Anaerobic digesters, biomass plant, Guangzhou
- 304 / 316L storage and process tanks
- Reaction and fermentation vessels
- Distillery anaerobic tanks
- Edible-oil tanks, Tacheng
- Distillery tank farm, Shandong
- 316L reaction vessels
- Shell-and-tube heat exchangers
- Solvent and specialty-chemical tank farms
- Specialty-chemical tank farm, Fujian
- Synthetic-ester stainless tanks, Jiangxi
Above grade and below,on the same job.
On fuel-station builds we supply both halves: the canopy steel overhead and the SF double-wall tanks in the pit, fabricated in one plant and installed by our own crews.
- Client
- National fuel retailer, Hunan & Henan branches
- Contract
- Framework supply agreements
- Scope
- SF double-wall tanks · canopy steel · installation
- Ethylene tank farm installationYantai, Shandong · Storage tanks
- Refinery phase II tank packageHuizhou, Guangdong · Storage tanks
- Floating-roof fabrication, crude reserveHainan · Storage tanks
Read the nameplate.
Licence numbers, scope and validity, set out the way they are stamped on our vessels, so your inspector can check them before the first call.
| Pressure vessel manufacture | TS2236612-2027 | Fixed pressure vessels, Class D (medium & low pressure) | to 2027-08-27 |
| Pressure piping installation | TS3836019-2027 | GC2 industrial piping | to 2027-04-14 |
| Industrial product licence | XK12-002-01012 | Steel tank bodies for hazardous chemicals | to 2027-11-17 |
| ISO 9001 · 14001 · 45001 | 01725Q10433R2M | Vessels, SF tanks, skids, steel structures, piping | to 2028-06-17 |
| UL 1746 | 20161115-MH61687 | Jacketed underground tanks for flammable liquids | issued 2016-11-15 |
| Construction contracting | D236A02207 | Petrochemical, building, M&E general contracting, Grade 2 | to 2030-02-14 |
| Explosion-proof installation | PCEC-2024-BC004 | Ex vapour-recovery units and instruments | to 2027-05 |
| EPEC supplier credit | 20240102063 | A+ rating, Sinopec EPEC procurement platform | from 2024-07 |
Send us the data sheet.
Tell us the medium, design pressure, temperature and quantity. An engineer replies with questions or a quotation.
- Sales contact
- Mr. Yu Jiakang
- WhatsApp / WeChat
- +86 183 1791 9067
- Factory
- No. 2666 Jinxian Avenue, High-tech Industrial Park, Jinxian Economic Development Zone, Nanchang, Jiangxi, China 331700
Pressure vessels, storage tanks, SF double-wall tanks, steel structures and skid-mounted units, fabricated in Jinxian, Jiangxi since 2003.
Jiangxi Wanlong Industrial Co., Ltd.
No. 2666 Jinxian Avenue, High-tech Industrial Park, Jinxian Economic Development Zone, Nanchang, Jiangxi, China 331700
Contact
- Mr. Yu Jiakang
- WhatsApp +86 183 1791 9067
- jiakang@wanlongindustrial.com
